Thanks Goemon,
This is installed in the shed behind my house. Unfortunately I am limited by cable size (underground x 40m) to said shed, but could push it to 20A.
I have an 80 frame WEG W21 (1.1kW) motor with inverter on my existing machine & have though about re using it with the new build but would like to have the capacity for rigid tapping & tool changing in the future.
I am finding availability from local suppliers very limiting. There appears to be a larger wealth of knowledge here on the forums.
Trying to find a spindle motor for a small VMC, 2-3hp that I can achieve 8000rpm at 1:1 ratio if possible.