584,861 active members*
5,051 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Mar 2018
    Posts
    4

    laser firing when traveling to origin

    Hi. I just change controllers and the laser is firing when traveling to its origin. It happens when I turn on the machine and when its finished cutting a job. It also wont fire at 21% but is full power at 22%. It did that with the last controller as well. Any ideas
    \Thanks

  2. #2
    Join Date
    Jan 2012
    Posts
    43

    Re: laser firing when traveling to origin

    what controller are you using and software?

  3. #3
    Join Date
    Apr 2006
    Posts
    108

    Re: laser firing when traveling to origin

    Hello,

    I have seen this a few times...

    The problem is much more likely to be in the logic portion of your laser power supply. The best and safest way to solve the problem is to replace the laser power supply.

    It all depends on how the controller and laser power supply are wired... but you should confirm the wires from Laser-On are connected to theL pin of the power supply. Then make sure the software is configured for Low signal triggering.

    Make sure the Analog signal is connected from the controller AN1 to the “IN” pin of the laser power supply.

    Please take time to tell us what solved the problems.

    Ray Scott
    Rabbit Laser USA

Similar Threads

  1. gcc c180 laser engraver problem .. laser tube firing a continuous weak beam
    By badrawy in forum Laser Engraving / Cutting Machine General Topics
    Replies: 2
    Last Post: 05-27-2020, 01:41 AM
  2. Laser wont stop firing while traveling to and from home
    By Nate33 in forum Laser Engraving / Cutting Machine General Topics
    Replies: 3
    Last Post: 05-17-2018, 01:16 AM
  3. China laser started firing laser during rapid moves
    By Billn in forum Laser Engraving / Cutting Machine General Topics
    Replies: 25
    Last Post: 12-21-2016, 06:32 AM
  4. Need help on Laser Firing in China Made laser Cutting Machine
    By doken in forum Laser Engraving / Cutting Machine General Topics
    Replies: 1
    Last Post: 12-16-2015, 04:11 PM
  5. Laser engraving machine not firing laser from software or controller.
    By JustTruckinng in forum Engraving Machines
    Replies: 1
    Last Post: 05-14-2014, 04:14 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •