[sonicjk]

Hey Guys,
Doing some face milling on my EM3116 and have found that the cutterhead is not square to the table. It's off enough that on a L-R cut the l cutters are taking over a thou after the R cutters have already passed by.
Hopefulyl that explanation makes sense.

The spindle is slightly out of square leaning left like this ----> \
I don't see any adjustments that I can make to rectify this.

Any ideas?

[Hytek]

I have exactly the same thing. Have contemplated many a time to loosen off the 4 mounting bolts a little and give it a.....nudge. I am quite certain it isn't meant to be that way. Odd tho that we both have the same issue