584,866 active members*
5,200 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1

    NVEM 200KHz Ethernet Mach3 Card

    Hi all
    I have NVEM 200KHz Ethernet Mach3 Card and I want to use LinuxCNC, any one could help in this?

  2. #2
    Join Date
    Mar 2003
    Posts
    35538

    Re: NVEM 200KHz Ethernet Mach3 Card

    Yes. Throw it away and get a Mesa card, as your NVEM card will only work with Mach3.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  3. #3
    Join Date
    Jun 2018
    Posts
    1
    I can't even get it to work with Mach3

  4. #4
    Join Date
    Aug 2010
    Posts
    6
    After 8 days I have nearly got my NEVM working, re installed a clean MAch3 setup, rewired my machine to suit pnp not npn inputs and a whole lot of other stuff about 100hrs so far, It works BUT NOT Reliably, NEVM looses ethernet comms regurlarly, (been through PC and adaptor power settings and every other setting) My main problem at this time is the calibration. It changes - Long moves are perpect, 0 - 30 mm randomly loose or gain up to 3 MM way too much.
    Just about had enough of the nvem ad about to throw it in the bit - Chineese DHgate seller very unhelpful and rude

    I wish I had done some more research about these NVEM units I would not buy one again - Has anybody had any success in gettin one to run on Mach3.

    Steve

Similar Threads

  1. NVEM Ethernet controller driver
    By GraemeT in forum Controller Cards
    Replies: 6
    Last Post: 02-10-2019, 10:51 AM
  2. Help with Novusun NVEM USB control card
    By morg769 in forum Controller Cards
    Replies: 30
    Last Post: 11-13-2018, 11:19 AM
  3. NVEM Ethernet controller custom mpg
    By greekart in forum CNC Machine Related Electronics
    Replies: 1
    Last Post: 01-11-2018, 07:11 PM
  4. Mach3 / XHC Machmotion Ethernet card slave axis
    By 80gus in forum Mach Software (ArtSoft software)
    Replies: 6
    Last Post: 05-22-2017, 09:02 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •