I hope this is the correct sub forum to share this post. If not feel free to move it to the correct location.

Tittle covers it for the most part. USB Gecko G540 controller capable of running grbl or estlcam. I have posted all required files and additional details on my Github page. Please check it out.
Github Page is HERE




Keeping with a 99% through hole board, I am hoping more people will be able to undertake this project. The single smd chip can be done with a one component stencil / solder paste and a hot air gun. The board is plug and play with the G540 and can also be used with any driver package that uses the same pinout as Gecko. With the use of a idc26 screw terminal board the pinout can be changed to match your requirements. If you find I left out a critical detail in my documentation please let me know on Github. Also make sure to post up and share your boards if you build one .