Took a set of full sized plans , traced it out on the
Logic Trace Digitizing System for CNC Digitizer - The Logic Group
and produced a tool path and cut it out
https://youtu.be/hxR4UQwsDO8
(place https:// in front of link) youtu.be/hxR4UQwsDO8
Took a set of full sized plans , traced it out on the
Logic Trace Digitizing System for CNC Digitizer - The Logic Group
and produced a tool path and cut it out
https://youtu.be/hxR4UQwsDO8
(place https:// in front of link) youtu.be/hxR4UQwsDO8
youtu.be/hxR4UQwsDO8 (place the https:// ) in front , not sure if video link is working here
How do you like the Logic Trace system? I am considering getting one.
I have been using the drawing board(s) since 2008 and I am not a cad person so it suits me for all my projects
and I have drawn some complicated diagrams
an example digitizing a full diagram showing the blue herron - YouTube