Hi all. I know there is information all over these forums regarding what I am about to ask, but quite frankly I am getting very confused the more I read. I am looking at purchasing a chinese laser, preferrably a 40 x 60 bed. I have read the good and the bad about g weike, which was what I was sure I would go with originally, and now I am conflicted. Should I be looking elsewhere? Also, I have read that the ruida controls are best. If so I would rather go with that as this is my first foray into laser cutting/engraving. I am tech savvy and can fix most things, so I am not too worried about fixing things if/when they break. Any info would be much appreciated. Thanks.