I have just purchased a Novusun usb 8727T4 5axis controler board . The board dose not come with a novusun.dll needed to load into Mach3 plugin ,could someone please tell me were I may obtain the dll.
Thread: johngo1
Results 1 to 4 of 4
-
06-07-2018, 01:53 AM #1
Registered
- Join Date
- Jun 2007
- Posts
- 5
johngo1
-
06-07-2018, 02:28 AM #2
Gold Member
- Join Date
- Feb 2007
- Posts
- 4553
Re: johngo1
John,
See attached file for USB driver and please post your progress.
Have a most awesome evening!
Jeff...Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.
-
06-07-2018, 02:32 AM #3
Gold Member
- Join Date
- Feb 2007
- Posts
- 4553
Re: johngo1
John,
Link to additional drivers:
https://www.nvcnc.net/nvum.html
Look near the bottom of the web page.
Jeff...Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.
-
06-07-2018, 11:36 AM #4
Registered
- Join Date
- Jun 2007
- Posts
- 5
Re: johngo1
Thanks Jeff.
Originally Posted by jalessi
I,m not having much luck, the board I have is a nu8727t4v4 or usb8727t4, the dll is a NOVUSUN-novusun-Plugin-Ver-3.0b Novusun is branded on the board ,it is five axis and USB connected.
I'm not sure If I have the correct Dll
John G
Reply With Quote
