So, with the last Windows 10 upgrade the Mach3 software has stopped working. Now I am looking for an alternative software. The only problem, is that I have a Mach3 Usb motion drive(Cheap aliexpress product, but perfect for me), and I don't know how to use that with an other program.
Results 1 to 2 of 2
-
06-08-2018, 10:29 PM #1
- Join Date
- Jun 2018
- Posts
- 1
Mach3 won't start looking for alternative
-
06-08-2018, 10:52 PM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Re: Mach3 won't start looking for alternative
Install the patch from this thread, and Mach3 will work again.
https://www.cnczone.com/forums/mach-...ml#post2182022
Your motion controller will not work with any other software.Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
Seeking Succinct Mach3 Training Material or Mach 3 Alternative...
By Ray C in forum Machines running Mach SoftwareReplies: 0Last Post: 04-15-2014, 03:59 PM -
Start Point to Mach3
By grandpa jay in forum CamBamReplies: 4Last Post: 02-24-2011, 01:39 PM -
Initial Start Up Running Mach3
By Ferrari2007 in forum Machines running Mach SoftwareReplies: 3Last Post: 12-09-2009, 10:41 PM -
Want to start with EMC, Mach3 user
By DennisCNC in forum LinuxCNC (formerly EMC2)Replies: 4Last Post: 08-03-2009, 03:39 AM -
Linux/EMC VS Mach3 Where to Start
By Gads in forum LinuxCNC (formerly EMC2)Replies: 4Last Post: 01-29-2008, 03:46 PM
Tags for this Thread
Posting Permissions
