585,937 active members*
3,887 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Mastercam > Program Transfer

Thread: Program Transfer

Results 1 to 3 of 3
  1. 06-08-2018, 11:26 PM #1
    cora1969
    cora1969 is offline Registered
    Join Date
    Feb 2014
    Posts
    10

    Program Transfer

    Hi there just wonder if anyone know how I can transfer program to machine from my laptop using usb cable to 25 pin do I need something special? thx
    Reply With Quote Reply With Quote
  2. 06-08-2018, 11:52 PM #2
    John_B
    John_B is offline Registered
    Join Date
    Nov 2006
    Posts
    418

    Re: Program Transfer

    You need a DNC program. Hyperterminal on older PC's will work, not sure if it's still built into Win10.

    A cheap or free program is Codeshark that can be found on the web. Many others out there...

    Sent from my SM-G965U using Tapatalk
    Reply With Quote Reply With Quote
  3. 08-13-2018, 04:22 PM #3
    cadcam
    cadcam is offline Community Moderator
    Join Date
    Apr 2003
    Posts
    3578

    Re: Program Transfer

    you will need a USB to serial adapter . then you need a female DB9 to D25 cable you have communications in Mastercam. of course you will need to find the proper setting in the control to match.
    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Program transfer
    By FlorinMBV in forum Fanuc
    Replies: 3
    Last Post: 05-04-2016, 09:18 PM
  2. VF-633 PROGRAM TRANSFER TO USB AND WARMUP PROGRAM
    By cncbeastmaster in forum Haas Mills
    Replies: 2
    Last Post: 07-31-2013, 08:39 PM
  3. program transfer between CNC and PC
    By sinha_nsit in forum Fanuc
    Replies: 10
    Last Post: 08-01-2009, 11:03 AM
  4. NC Transfer Program
    By JamesBond in forum Uncategorised CAM Discussion
    Replies: 69
    Last Post: 04-08-2009, 12:40 AM
  5. transfer of program
    By Dar in forum Bridgeport / Hardinge Mills
    Replies: 10
    Last Post: 09-14-2007, 03:43 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules