584,812 active members*
5,395 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Dolphin CAD/CAM > Dolphin and Centroid Acron
Results 1 to 4 of 4
  1. #1
    Join Date
    Oct 2009
    Posts
    22

    Dolphin and Centroid Acron

    Is there any one using Dolphin with a Centroid Acron setup.Thanks.


    John

  2. #2
    Join Date
    Aug 2004
    Posts
    51

    Re: Dolphin and Centroid Acron

    Hi John,
    I use Dolphin with my Centroid Acorn. After i wrote a new (milling) PostProcessor for it, it's quite convenient to use now. i don't use it for the lathe.
    Dean

  3. #3
    Join Date
    Oct 2009
    Posts
    22

    Re: Dolphin and Centroid Acron

    Quote Originally Posted by deanq View Post
    Hi John,
    I use Dolphin with my Centroid Acorn. After i wrote a new (milling) PostProcessor for it, it's quite convenient to use now. i don't use it for the lathe.
    Dean
    Thanks for the information Dean. I'm new to cnc and I'm still working on the conversion. How hard was it to rewrite the PP?

    John

  4. #4
    Join Date
    Aug 2004
    Posts
    51

    Re: Dolphin and Centroid Acron

    John,
    If your familiar with PP formats and know what you want, with a little trial & error, I was able to write what I wanted. It all depends on your willingness to experiment. (save often )

Similar Threads

  1. Dolphin Demo / Dolphin Sales / Dolphin Support
    By Dolphin USA in forum Dolphin CAD/CAM
    Replies: 2
    Last Post: 10-28-2012, 05:28 PM
  2. Dolphin CAD
    By JPATTE09 in forum Dolphin CAD/CAM
    Replies: 3
    Last Post: 06-09-2008, 11:40 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •