584,800 active members*
4,868 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > EMCO CNC Machines > New Emco Concept 55 mill owner! I'm lost with Fanuc. (Series 21)
Results 1 to 2 of 2
  1. #1
    Join Date
    May 2018
    Posts
    4

    Question New Emco Concept 55 mill owner! I'm lost with Fanuc. (Series 21)

    Hello! I'm looking for some help that should be basic for anyone who uses an emco/fanuc. My machine is running Series 21.

    I have just gotten everything sorted. I got the heavy machine on my work bench by myself, diagnosed and repaired broken switches and wires, picked up a new pc, tracked down a winNC license, and have gotten this machine in operating condition.

    The catch is, I don't know how to operate it.

    I have figured out how to jog, and input code to change tools. That's it.

    Reading the Fanuc 21 manual is a little hard to get through.

    I'm used to mach3 on my sherline, and setting up a job is almost common sense.

    I need a crash course on how to set up a job. How to measure my tools, how to set my workpiece reference, and how to load an NC file.

    Easy and the most basic stuff. Heck I'd even pay for an hour or two of your time if you could walk me through it step by step over the phone or Skype type thing.

    I just know once I figure out how to get a job set up and used to the controls, everything will click and make sense.

    Also if anyone has any English reference materials that can get me on the right path, I'd greatly appreciate it! Also if this post should be anywhere else in the forum lmk!

  2. #2
    Join Date
    Jul 2018
    Posts
    1

    Re: New Emco Concept 55 mill owner! I'm lost with Fanuc. (Series 21)

    Hello,

    I see that this post is a month old but are you still in need of any help.
    I am by no means an expert but i do have my emco pc mill 55 running and making chips.

Similar Threads

  1. Dyna DM2400C or EMCO Concept Mill 55
    By whitefox in forum Dyna Mechtronics
    Replies: 4
    Last Post: 06-15-2018, 02:52 AM
  2. Presentation and help about Emco Concept Mill 155
    By INNMILL in forum EMCO Mills
    Replies: 0
    Last Post: 12-05-2017, 08:37 PM
  3. emco concept 55 mill startup trouble
    By Heathgee in forum EMCO CNC Machines
    Replies: 2
    Last Post: 11-13-2014, 01:59 AM
  4. Replies: 0
    Last Post: 08-16-2011, 11:22 PM
  5. emco Concept MILL 300?
    By byronk in forum EMCO CNC Machines
    Replies: 1
    Last Post: 02-17-2011, 11:04 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •