584,866 active members*
5,155 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1

    Alarm no SKT21

    Hello.
    I'm with him, the photo alarm. AL-32 center point ng.
    the lathe does everything except turn the spindle. does not run in the automatic mode.
    Does anyone know how to solve ??
    thank you.

  2. #2
    Join Date
    Apr 2009
    Posts
    1262

    Re: Alarm no SKT21

    Does your machine have the tail stock quill confirmation switches? They may be out of position or you may need to bypass them with M-code in order to turn on the spindle with the quill retracted.
    Experience is what you get just after you needed it.

  3. #3
    Join Date
    May 2016
    Posts
    526

    Re: Alarm no SKT21

    AL-32 Abnormality in RAM internal to LSI for serial data transfer

    Did you try and load a program as I think your memory requires clearing

  4. #4
    Join Date
    Nov 2018
    Posts
    25
    Hi
    I understand this thread is one year old, but have you solved your problem?
    I have a SKT200 2007 Oi with the same alarm.
    When i try to MDI ex: M03S1000 it clicks and pops the same Al.
    rgds

Similar Threads

  1. Replies: 4
    Last Post: 05-03-2019, 08:58 PM
  2. Kia SKT21 turret drive
    By B Godard in forum Hyundai Kia
    Replies: 5
    Last Post: 09-18-2013, 05:30 PM
  3. Replies: 6
    Last Post: 03-13-2013, 03:32 PM
  4. Replies: 4
    Last Post: 06-12-2009, 09:15 PM
  5. fanuc oi-tc on a hyundai-kia skt21
    By mekdad in forum Fanuc
    Replies: 3
    Last Post: 12-11-2007, 01:01 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •