Re: Help! I think I lost all my parameters...
Go thru all parameters and check if actually they are all zeroes or not. The 100 alarm is just telling you that the control is enabled to change parameters and it has to be turned off at some point.
If in fact you lostthe parametersyou need to get a copy of them with the machine builder or maybe there is a copy within your manuals or inside the machine. If the parameters are not lost then you have to do a procedure to send the machine home.
If you want to write back please use my email [email protected]
Best regards
jolulank
www.doctornumerico.com
cnc physicians