584,837 active members*
5,022 visitors online*
Register for free
Login

Thread: Need help

Results 1 to 3 of 3
  1. #1

    Need help

    Does anyone know how to configure a Siemens 802sl 4th a is the parameter is erased and we cannot run the 4th axis anymore thanks!

  2. #2
    Join Date
    Jun 2017
    Posts
    12

    Re: Need help

    Ok, so the parameters on 828dsl (pretty certain 802 are the same) are as follows:

    Setup - machine data - drive machine data - axis machine data

    using vertical soft key axis + / axis - select 4th axis . You then need to set MD30130 to 1 & MD30240 to 1, NCKPO (or complete power down) to activate datas. As SL sinamics drives are drive cliq, they should self configure, you may need to power down again.

  3. #3

    Re: Need help

    Thanks control concern but our 4th axis did not come with the machine it was bought separately I don’t think it has a drive cliq and the Taiwanese guy configured it but now it’s been erased but I will try what you said.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •