hello, please, is it possible to have coolant through live holders, for a citizen L12 ?
at this moment, all live holders are running dry / kindly
hello, please, is it possible to have coolant through live holders, for a citizen L12 ?
at this moment, all live holders are running dry / kindly
Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg
sorry for repeating, but please, is there a solution ? kindly
Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg
This is how I provide coolant to my live tooling, not sure if you can do this with a Citizen L12, but I assume it has a provision for coolant ports in the turret or gang holders. The other tools have through coolant or use the normal flood system.
Jim Dawson
Sandy, Oregon, USA
Check this site.
https://ca.rego-fix.com/en/products/specials/recool
Also here is an article that may help.
https://www.productionmachining.com/...swiss-machines
hello again / i just looked over those : i believe that the machine has er8, while the reCool does not go below er11
i was hoping for a standard product, so to avoid crafting time / kindly
Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg