Hello,

Two weeks ago I asked in this forum for the parameters for this machine, unfortunately all I got was the parameters for a VMC 2216 from a good samaritan. and after almost 3 days the machine turned on again without alarms, BUT I cannot send the machine home. In all 3 axes it alarms when I try to move it and only in the X axis actually moves a little bit, maybe 1/4". So I am thinking maybe is a parameter related problem.
Both machines are supposed to work with the same Yaskawa servo drives and motors, and I used the same parameters but I still get the 410 alarm. I already unhooked the motor so there is no physical load on it and still the same alarm.
I am thinking to change parameter 1826 and see what happens.

Any ideas?

jolulank