Hi All,

We have a Zayer Thera milling machine with a Heidenhain TNC 530i control system. the machine is giving an error when trying to do a tool change. I do not know Heidenhain controls at all. I am not sure if anyone can give me an idea of what to do?

The error is "TOOL MAGAZINE WRONG POSITION ! !"

Cause of error:
THE POSITION OF THE TOOL MAGAZINE HOLE IS NO APPLICABLE TO THE REQUIRED TOOL.

Corrective action:
IT'S NECESSARY TO CHECK THE SITUATION OF TOOLS IN THE MAGAZIN CHECKIN AT THE SAME TIME THEIR POSITION IN THE TOOL TABLE.