[KyleC1]

Hi can anyone help me on my 10" Megabore Fanuc 18i-TB.
Baruffaldi turret with DMS-08BF drive it wasnt indexing and turned out the motor is faulty so they replaced the motor and could only index one tool at a time anything more would through up a alarm turret zero search time out, we installed the new drive and now doesnt index at all and give a 4.1 alarm on drive and same alarm turret zero search time out please help

[Heavy_Metal]

Hi KyleC1,

Check on of these sites.

Regards,
Heavy_Metal.

Baruffaldi Manuals - Danobat-Marathon LLC

Machine Tool Accessories by Baruffaldi

Marathon Machine Tools, Inc. - Service & Applications

https://www.baruffaldi.it/en/downloa...?cn-reloaded=1

[KyleC1]

Hi Thank you will it have the zero position procedure on the DMS-08BF?

[KyleC1]

They dont have the zero set procedure do you know where i Can download it?

[zavateandu]

Hi can anyone help me on my 10" Megabore Fanuc 18i-TB.
Baruffaldi turret with DMS-08BF drive it wasnt indexing and turned out the motor is faulty so they replaced the motor and could only index one tool at a time anything more would through up a alarm turret zero search time out, we installed the new drive and now doesnt index at all and give a 4.1 alarm on drive and same alarm turret zero search time out please help

it is a beta drive for the turret?
if yes,u should have a screen special for this drive.

[mbservice]

You will possibly have to go through the PMM parameters

[Florsita3]

Hi can anyone help me on my 10" Megabore Fanuc 18i-TB.
Baruffaldi turret with DMS-08BF drive it wasnt indexing and turned out the motor is faulty so they replaced the motor and could only index one tool at a time anything more would through up a alarm turret zero search time out, we installed the new drive and now doesnt index at all and give a 4.1 alarm on drive and same alarm turret zero search time out please help

Who are you, where is installed your Machine? I can send you all technical info for easy to solve, and reserved procedure for to check, for diagnostic, and for alignment RESOLVER/MOTOR.
Get me also before Label on servomotor, and Label on servodrive DMS...

[Florsita3]

it is a beta drive for the turret?
if yes,u should have a screen special for this drive.

Not exist BETA DRIVE on this machine Megabore, there is a CUSTOM PROCEDURE for to install and for to SET after CHANGING SERVOMOTOR B5602p or Proper DRIVE DMS. Only need Serial N. of Turret and i can specify exactly procedure.

[MehdiJamshidi]

Hi MEN
All these links are unavailable. Do you have the list of alarms, please give me
I use this drive model according to the attached images
I recently had a problem and the error 9.2 is displayed on the drive
Please advise how to fix this error

[MehdiJamshidi]

I use this drive model according to the attached images
I recently had a problem and the error 9.2 is displayed on the drive
Please advise how to fix this error

[MehdiJamshidi]

I use this drive model Baruffaldi turret Type : DMS-08BF
I recently had a problem and the error 9.2 is displayed on the drive
Please advise how to fix this error Do you have the list of alarms, please give me.