584,837 active members*
5,145 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > CNC Machine Related Electronics > Anilam 1400M Keyboard/rotary switch issues
Results 1 to 2 of 2
  1. #1
    Join Date
    Jun 2018
    Posts
    1

    Question Anilam 1400M Keyboard/rotary switch issues

    We have a Fryer MB-11 with aa Anilam 1400M Control, after replacing the Real time clock (motherboard battery) we have lost the functionality of the Rotary selector switches (for Axis selection, feed rate, jog rate, and spindle override). Everything else seems to work fine, machine boots, homes, and all programs are accessible. A keyboard error displays during boot up. It seems to have lost the parameters to read the selector switches, is there a way to restore that?

    After home is complete, all we can move is the x axis very slowly. I checked all the fuses and physical connections, they look OK.

    Any help in this matter will be greatly appreciated.
    Attached Thumbnails Attached Thumbnails IMG_20180625_142224a.jpg   IMG_20180628_142025.jpg  

  2. #2
    Join Date
    Mar 2011
    Posts
    67

    Re: Anilam 1400M Keyboard/rotary switch issues

    Check CMOS settings in the COM port area. I believe the manual panel was connected to COM1

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •