584,866 active members*
5,090 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1

    About Warming up my CNC machine

    Hello,

    i recently designed my warm-up program and used this block (G4F500) in top of the warm-up program to make wait time .

    Is that right and no problems with my machine?


    Thank you.

  2. #2
    Join Date
    Sep 2018
    Posts
    10

    Re: About Warming up my CNC machine

    G04 is dwell and typically you use an axis for dwell times.
    Eg,
    G04 X5. (5 second dwell)

    But dwells don't actually do anything so machine should be fine.

  3. #3
    Join Date
    Feb 2011
    Posts
    353

    Re: About Warming up my CNC machine

    the answer depends on the control brand and model
    Fanuc
    okuma
    siemans
    ect

Similar Threads

  1. LT200 E100L automatic warming up machine
    By pawel.mayor in forum Okuma
    Replies: 1
    Last Post: 02-06-2011, 02:45 AM
  2. What it will really take to stop global warming???
    By Geof in forum Environmental / Alternate Energy
    Replies: 88
    Last Post: 12-16-2009, 02:43 AM
  3. Gorebal Warming
    By pete700 in forum Environmental / Alternate Energy
    Replies: 0
    Last Post: 04-10-2008, 06:40 PM
  4. Someone is Stealing the Warming!!
    By fizzissist in forum Environmental / Alternate Energy
    Replies: 14
    Last Post: 04-01-2008, 05:32 PM
  5. Warming up steppers
    By Dylwad in forum Stepper Motors / Drives
    Replies: 7
    Last Post: 02-23-2005, 10:50 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •