528,134 active members*
2,586 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Mastercam > Post Processors for MC > OSP Okuma POST PROCESSOR MASTERCAM 2018
Results 1 to 1 of 1
  1. #1
    Junior Member
    Join Date
    Jul 2018
    Posts
    1

    OSP Okuma POST PROCESSOR MASTERCAM 2018

    Hi,

    Someone has the post processor OSP P300M OKUMA to MasterCam 2018 to share?
    Thanks in advance

  2. #2
    Junior Member
    Join Date
    Mar 2015
    Posts
    9

    Re: OSP Okuma POST PROCESSOR MASTERCAM 2018

    I know this is a kinda of a late reply but I hope it helps someone.

    Only Okuma post I have.

  3. #3

    Join Date
    Sep 2020
    Posts
    1

    Re: OSP Okuma POST PROCESSOR MASTERCAM 2018

    Hello TampaCNC, thank you for the okuma post files !!! Did you tested some of this post processor?

  4. #4
    Junior Member
    Join Date
    Mar 2015
    Posts
    9

    Re: OSP Okuma POST PROCESSOR MASTERCAM 2018

    works fine for me.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •