585,597 active members*
2,882 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > MadCAM > Possible Bug —Version 6

Thread: Possible Bug —Version 6

Results 1 to 2 of 2
  1. 07-09-2018, 11:35 PM #1
    JerryBradley
    JerryBradley is offline Registered
    Join Date
    Jun 2012
    Posts
    15

    Possible Bug —Version 6

    I am using Madcam 5Extra,Version 6.0.2018.702. When creating a simple 2D profile, I select the curve to profile and the cutter outline and “direction of cut” arrow appear as normal. However, the profile curve generated is always on the opposite side from that selected. i.e., if I select an outside profile, MadCAM generates a cut on the inside.This error can be easily corrected by selecting the correct radio button in the pop-up window. So, there is a simple workaround.

    Just curious if anyone else has seen this behavior.

    Jerry
    Reply With Quote Reply With Quote
  2. 01-23-2019, 02:21 PM #2
    outlier
    outlier is offline Registered
    Join Date
    Nov 2013
    Posts
    36

    Re: Possible Bug —Version 6

    +1

    Sent from my Pixel 3 using Tapatalk
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Licenced Mach3 Version R3.043.022 and ESS changes to demo version
    By marcberv in forum Mach Software (ArtSoft software)
    Replies: 5
    Last Post: 01-22-2017, 02:49 PM
  2. I have version 13 and upgraded to version 13.5 but drawing not showing in cam
    By jnjr65 in forum Dolphin CAD/CAM
    Replies: 0
    Last Post: 12-28-2015, 10:15 PM
  3. Problem driving long tools into vice......second version.seems version one is closed.
    By dougputt in forum Mastercam
    Replies: 5
    Last Post: 06-26-2014, 12:02 PM
  4. powermax 45 machine version vs hand version
    By landmark in forum Hypertherm Plasma
    Replies: 1
    Last Post: 02-14-2010, 11:13 PM
  5. VCarve Pro Trial version 3.0: any newer version?
    By monte55 in forum Vectric
    Replies: 2
    Last Post: 12-12-2006, 12:12 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules