[CAD226B]

Would like to use this servo in my mach3 mill set up. Does anyone possibly have a data sheet or know how to get one. I have been trying to obtain information so that I can buy the correct driver and controller etc. but its seems to be non existent. Any help would be greatly appreciated. Thanks ! (see attachéd photos)

[skrubol]

From what I can see, it doesn't look like there's an encoder on those, just a tach, so they won't really work (without adding an encoder) with anything modern. I'd say your best bet is to try to sell them on Ebay and just get steppers if you're on a budget.