Fiber laser cutting machine is famous for processing metal sheets, and the processing quality is good! Generally speaking, the thinner the fiber-optic laser cutting machine is, the easier it is to process metal sheets. Is this really the case?
60W Laser Cutting Machine
For fiber laser cutting machines, cutting 1mm sheet metal is an easy task, and the cutting speed is very fast. It is also very simple and easy to process in the processing operation! But cutting a 0.08mm sheet is not the case. Simple, although the cutting is very easy, but in actual operation, because the sheet is too thin, the residual material is easy to lift, affecting the cutting precision. If you rely on manual processing according to the rest, it is also unpleasant, time-consuming and laborious!
150W CO2 Laser Cutting Machine
Some people may think that it would be better if a few sheets were superimposed together! Theoretically it can be achieved, but if it is actually operated, there will be a more deadly problem, that is, accuracy! For the surface of the sheet The accuracy is achieved, but for the bottom plate, the residue will remain on the surface, and the precision will be greatly discounted.
Therefore, for fiber laser cutting machines, not the thinner metal plate is more conducive to fiber laser cutting machine processing!