Im trying to cut 2 sinks in nano glass. I was using a Dekton Fingerbit but just a little bit after it started the machine stopped and when I looked at the bit the fingerbit was completely gone and melted into the material. Any advice on what bits to use and how fast I should go?
Thread: trying to cut nano glass
Results 1 to 2 of 2
-
07-12-2018, 04:28 PM #1
Junior Member
- Join Date
- Jul 2018
- Posts
- 1
trying to cut nano glass
-
07-12-2018, 04:47 PM #2
Community Moderator
- Join Date
- Dec 2013
- Posts
- 5717
Re: trying to cut nano glass
Are you using any coolant? Based on the online videos I looked at, it seems that they are using a heavy water spray.
Jim Dawson
Sandy, Oregon, USA
Reply With Quote
