Pulse Encoder Pin Out HELP please and thank you so much.
please see added picture.
I dont know my pin out on my Pulse Encoder and I don't have a electrical print of the machine for any of the wiring.
is it possible for someone to please give me the pin out on the main board?
My main board is A16B-1000-0030/ 06C
my pulse encoder is A860-0300-T002
I know there is two different models for the encoder......Model 0.1U and Model 1U
I need to know the pins so I can wire in new software and hardware. my hair is almost gone now trying to figure this out.
email me at [email protected]
many million of thanks.
Model 0.1U
A - PCA (A+ or MA+)
B - /PCA (A- or MA-)
C - PCB (B+ or MB+)
D - /PCB (B- or MB-)
E - PCZ (+Index Marker is Optional)
F - /PCZ (-Index Marker is Optional)
G - Not Used
H - Not Used
J - Not Used
K - Not Used
L- 5VDC (supply 5+ VDC)
M- (5V common ground)
N - SHIELD
P - OH1 OV
R - OH2
S - Not Used
T- 5VDC (supply 5+ VDC)
U- (5V common ground)
Model 1U
A - PCA (A+ or MA+)
B - PCB (B+ or MB+)
C - Not Used
D - /PCA (A- or MA-)
E - /PCB (B- or MB-)
F - PCZ (+Index Marker is Optional)
G - /PCZ (-Index Marker is Optional)
H - Sheild
J - +5V
K - +5V
N - OV (5V common ground)
P - Not Used
R - OH1
S - OH2