I have a Haas VF-2 2005, two months ago we turned on the CNC, it did not reach the operating system, it only showed a number in hexadecimal.
A technician from Haas, gave us the diagnosis, the proccessor card was damaged.
We send the proccessor to repair, after repair, when the CNC turns on, it shows the software version (30.14)
Ram Memory 1024k
And a system symbol:
>
In the next visit the technician of Haas told us that it was necessary to install the software, he left us a file list (m1318b.bin), and showed us how to install.
Type S38400 and then the F command
We have tried several times, but when the file starts to rise, on the screen we see:
Header Error
Any tip or idea to fix this problem?
Thanks!!