Hi! I recently bought a CNC 3018 that comes with a woodpecker board. After putting it together I managed to carve small designs (2cm), but recently I decided to make bigger things and I found a problem. If the stepper motor needs to move more than 25.00 steps (according to GRBLcontrol) it will stop and make a buzzing sound for a couple of seconds, not finishing its path and making the designs to look weird.
I thought at first this could be a problem related to the stepper motors, but after playing a bit with the woodpecker board I found that all motors work fine when using the Z axis.
Is there anything I can do to make it work?
Results 1 to 1 of 1
-
07-16-2018, 10:39 PM #1
- Join Date
- Jul 2018
- Posts
- 1
woodpecker 3018 problems with X and Y axis and stepper motors
Reply With QuoteSimilar Threads
-
Woodpecker CNC 3018 issue - all axes locked
By UT-Matt in forum Chinese MachinesReplies: 6Last Post: 07-28-2019, 04:56 AM -
NOOB NEEDS HELP HAVE A CNC 3018 WITH A "WOODPECKER CNC GRBL 0.9 BOARD) NEED TO UP RPM
By bruce1129 in forum Laser Engraving / Cutting Machine General TopicsReplies: 13Last Post: 07-11-2018, 04:09 AM -
Two stepper motors for one axis.
By hand1 in forum CNC Machine Related ElectronicsReplies: 18Last Post: 12-17-2014, 01:25 PM -
Using two stepper motors for one axis
By gavinpoyner in forum Maintenance DIY DiscussionReplies: 5Last Post: 05-06-2012, 02:32 PM
Tags for this Thread
Posting Permissions
