584,812 active members*
5,303 visitors online*
Register for free
Login
IndustryArena Forum > Manufacturing Processes > Milling > (Help) Cnc mill project for the federal university of santa maria
Results 1 to 3 of 3
  1. #1
    Join Date
    Jul 2018
    Posts
    1

    (Help) Cnc mill project for the federal university of santa maria

    Hi everyone, I am participating in a project for the construction of a CNC milling machine due to the difficulties of the university in buying this type of equipment, I would like indications of software that I can use in the equipment to control the step motors, some software so that the students can make G-codes for machining. If you can point me to articles or something so that I can study further.

    Thanks!

  2. #2
    Join Date
    Jul 2018
    Posts
    16
    Answer is easy : MACH3



    https://voltatek.ca

  3. #3
    Join Date
    Jul 2018
    Posts
    1
    Try googling mach3 cnc will get lot of data

    By no means it would be easy !!!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •