Re: Fusion 360 / Tormach Slant Pro - Front mounted tooling, X axis positive or negati
It's set in the turret number used when you set up the tools (even if you're not using a turret). See the post processor notes.
"Turning post for Tormach PathPilot on Slant-PRO or RapidTurn. Use Turret 0 for Positional Turret, Turret 1 for QCTP on Front Post, Turret 2 for QCTP on Rear Post, Turret 3 for Gang Tooling on Front Post, Turret 4 for Gang Tooling on Rear Tool Post. Valid RapidTurn Turrets are 0/2/4."
The Body Armor Dude - Andrew