Looking for suggestions.

I recently purchased a used CAMaster Stinger III (49" x 98" cutting area) and would prefer not to use a converter or vfd. I do not have 3 phase available and this will not be used in a commercial shop.

The only single phase systems I have found are the ShopSabre F4 with 4 motors running at a total of 10.69 in. Hg and 570 cfm and the BlackBox Hurricane which also has 4 motors running at a total of 441.2 cfm and 10.66 in. Hg. Both weight app. 200lbs, are rated at 220v 30a and have individual switches for each motor. The F4 also has intake and exhaust fans to cool the motors.

Thanks
Ron Hampe