584,841 active members*
4,285 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Jul 2018
    Posts
    2

    Co2 upgrading: laser supply selection HELP! [2nd section]

    Hi there! I´m Ramon from Argentina. Sorry about my english level...
    So, here is the question:
    We have one 80w laser engraving and cutting machine, its a chinese one.
    The actual laser supply its an 80W ZR-80W from ZRSuns laser News-LINYI ZHAORI ELECTRONICS CO.,LTD. and the laser tube (we´ve bougth it here so we have no idea about it, just its an 80W one)
    We want to upgrade the machine to a 120W or 150W level (maybe just 120W because the 150W tubes are too much expensives here, due to custom taxes etc.)
    I have seen this page (first, in aliexpress) https://www.cloudraylaser.com/collec...w-power-supply
    They seem to be a "serious" seller, not like the most of them in china
    What do you think? Should I buy one "Cloudray"? Any experience? Comments?
    Dollars are big money for us, we cant afford a Reci tube & supply
    Thanks!
    Ramon

  2. #2
    Join Date
    Jul 2018
    Posts
    2
    Hello Ramon.
    I bought the 60 w power supply in the store that Cloudray has in Aliexpress and I have not had any problems. It arrived before the deadline and works perfectly. I also bought an EFR tube on aliexpress (at another store, TECNR Store, and I did not have any problems either) In both cases I had to pay customs fees (Spain) and postage, but it was cheaper than buying them from local suppliers .

    Hola Ramón.
    Yo compré la fuente de alimentación de 60 w en la tienda que Cloudray tiene en Aliexpress (Cloudray Official Store) y no he tenido ningún problema. Llegó antes del plazo fijado y funciona perfetamente. También compré un tubo EFR en aliexpress (en otra tienda, TECNR Store), y tampoco tuve ningún problema. Un saludo. En ambos casos tuve que pagar tasas de aduana (España) y portes. Aún así, fue más barato que adquirirlos de proveedores locales.

Similar Threads

  1. Replies: 6
    Last Post: 10-28-2014, 10:51 AM
  2. Power Supply Selection
    By gathaz in forum CNC Machine Related Electronics
    Replies: 0
    Last Post: 05-15-2014, 01:14 AM
  3. help with power supply selection
    By nwebi in forum Stepper Motors / Drives
    Replies: 1
    Last Post: 01-06-2014, 06:27 PM
  4. Tips for laser power supply & tube upgrading
    By Melody-gweike in forum Laser Engraving / Cutting Machine General Topics
    Replies: 1
    Last Post: 05-26-2012, 03:01 AM
  5. Upgrading to G540, power supply questions
    By awetmore in forum Taig Mills / Lathes
    Replies: 4
    Last Post: 05-28-2010, 07:53 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •