584,842 active members*
4,214 visitors online*
Register for free
Login
IndustryArena Forum > OpenSource CNC Design Center > Arduino > GRBL interfacing with other arduino? Maybe? No?
Results 1 to 5 of 5
  1. #1
    Join Date
    Aug 2009
    Posts
    56

    Question GRBL interfacing with other arduino? Maybe? No?

    Thinking out again, might be too much time issue.

    I have currently 2 GRBL machines and it seems like these little controls are multiplying, sooner or later. I¨m currently 3D printing out some midsize project and keep wondering is there anything arduino related that can send gcode to GRBL from SD card. 3D printers generally do this, but with GRBL it would be two different arduinos. Did some gooooogle and results get me nowhere, well there is something with rasberry, but it won´t fit the bill. I`m thinking purpose build platform with those big 3D printer friendly LCD´s and build in card readers, few extra buttons for homing and jogging. This would be really nice interface, but anyone done it yet, because this is so out of my capabilities.

    Found something related:
    grbl based cnc without pc
    https://www.shapeoko.com/wiki/index.php/Headless

    This headless looks somehow good, but lacks important features.

  2. #2
    Join Date
    Mar 2015
    Posts
    409

    Re: GRBL interfacing with other arduino? Maybe? No?

    How about a small tablet running windows or linux and your favorite gcode sender. Than you have a (touch) display and can put in an SD card. You can control the tablet from another PC running TeamViewer or other remote control software.

  3. #3
    Join Date
    Aug 2009
    Posts
    56

    Re: GRBL interfacing with other arduino? Maybe? No?

    It seems like some sort tablet is the way to go. My thinking about another arduino board is for bulletproof design, doing only one thing, with tablet etc. there are every time some random variables why it stop working. Cheapest android tablet is around 70e, so maybe. Not very happy with laptop, it just collects all the dust.

  4. #4
    Join Date
    Mar 2015
    Posts
    409

    Re: GRBL interfacing with other arduino? Maybe? No?

    Keep in mind that there aren't many gcode senders that run on android, i only know one!

  5. #5
    Join Date
    Jan 2005
    Posts
    1943

    Re: GRBL interfacing with other arduino? Maybe? No?

    Quote Originally Posted by hfjbuis View Post
    Keep in mind that there aren't many gcode senders that run on android, i only know one!
    You must not have checked in a while as there are many android based senders for USB otg, or bluetooth. If you have an old cell phone that supports otg, then it can work at no cost except for maybe a otg cable

Similar Threads

  1. Interfacing homemade servos with NC Software (LinuxCNC or grbl?)
    By FPVdude in forum CNC Machine Related Electronics
    Replies: 2
    Last Post: 01-27-2019, 12:08 AM
  2. New DIY CNC Arduino Nano+GRBL+UGS
    By gerbilovsky in forum DIY CNC Router Table Machines
    Replies: 8
    Last Post: 10-24-2017, 01:56 PM
  3. Arduino/Uno/Grbl
    By Mckyjns in forum Arduino
    Replies: 2
    Last Post: 08-22-2017, 03:14 AM
  4. Interfacing Arduino + GRBL with 3020 control box
    By dannystaple in forum Open Source Controller Boards
    Replies: 3
    Last Post: 02-05-2014, 10:01 PM
  5. Interfacing an Arduino-based pendant
    By sansbury in forum Mach Software (ArtSoft software)
    Replies: 4
    Last Post: 12-07-2011, 04:40 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •