I run a MultiCam Digital Express and have been getting motor faults for about 12 hours now. The machine faults when trying to home before the gantry even tries to move. It looks like it faults while trying to test the different knife motors. Any help would be awesome.
I have attached images of what error codes are being thrown but I will include it here in text form
Motor Fault (0x EC)
-OK
-OK
-OK
-OK
-FAULTED
Z3|1000DE_E290_Z3
Count 5: Drive is OK Safety stop basis: Tracking error exceeded. Possible root causes Mechanical Problem. Low bus voltage. Command too fast.