Hi,
Today after finishing a job my plasma torch stopped working..it's not going up or down.
I have hypertherm power max 65,
HYD-THC xpthc-4h height controller and starfire control system.
Both up_limit n dn_limit led in HYD-THC are on..I think if those led goes off then my problem might be solved..wat may be the reason for them to turn on..
Pls help..
Results 1 to 7 of 7
Threaded View
-
08-03-2018, 08:13 PM #1
Registered
- Join Date
- Sep 2014
- Posts
- 2
My plasma torch not moving up and down..HYD-THC XPTHC-4H
Reply With QuoteSimilar Threads
-
torch vibrates when moving slow
By cruz03 in forum CNC Plasma / Oxy Fuel Cutting MachinesReplies: 1Last Post: 05-30-2018, 07:00 PM -
cnc plasma control XPTHC-4 torch doesnt move
By shakibdriss in forum CNC Plasma / Oxy Fuel Cutting MachinesReplies: 0Last Post: 05-23-2017, 07:42 PM -
How to wire a new plasma torch to plasma cam??
By Bradsky in forum PlasmaCamReplies: 1Last Post: 04-05-2013, 12:26 PM -
CNC Plasma - Moving Gantry vs Moving workpiece?
By ESDave in forum Plasma, EDM / Other similar machine Project LogReplies: 1Last Post: 02-23-2013, 11:53 AM -
CNC plasma machine works with spindle and plasma cutting torch
By wyl6362708 in forum VideosReplies: 1Last Post: 08-05-2011, 08:21 AM
Tags for this Thread
Posting Permissions
