[nickrogers]

Hello,
I am running MACH3 on Windows 7, and having given up on the UC100, I have got a UC400ETH which is working OK apart from the spindle does not start.
I am attaching a picture of the current settings.
Is there something wrong with them?
Any help would be appreciated.
Thanks
Nick

[ger21]

The plugin status window has nothing to do with the spindle.

Need to see your ports and pins, output pins, and spindle pages, and details of how the VFD is wired and controlled.

[nickrogers]

The plugin status window has nothing to do with the spindle.

Need to see your ports and pins, output pins, and spindle pages, and details of how the VFD is wired and controlled.

Hi Gerry,
Thanks for your quick reply.
Here are pics of how MACH3 is configured, also how VFD is set up.
Machine was working with UC100, but I was having problems with intermittent connection.
Regards
Nick

[A_Camera]

Hi Gerry,
Thanks for your quick reply.
Here are pics of how MACH3 is configured, also how VFD is set up.
Machine was working with UC100, but I was having problems with intermittent connection.
Regards
Nick

Pics missing from the post.