565,473 active members*
2,252 visitors online*
Register for free
Login
Page 2 of 2 12
Results 21 to 25 of 25
  1. #21

    Join Date
    May 2018
    Posts
    33

    Re: Morn Fiber laser/ezcad2 stuck in demo mode

    Software should match with control board.If your board is FBLI-B-LV4,then the software is in attachment.Maybe you need uninstall your old driver and install the new driver again.Following are two videos to show how to install and uninstall drivers.
    https://youtu.be/3_PnlOZsh7A
    https://youtu.be/R1ohAMcFWlw

  2. #22

    Re: Morn Fiber laser/ezcad2 stuck in demo mode

    Hi
    I have a "Laser Fiber Min", and I'm having a hard time getting the machine to communicate with the computer.
    Using notebook the same works more easily, using desktop does not work at all.
    I already installed the correct driver and it still doesn't work.
    I'm using Ezcad 2.14.10 Lite and when I run the program, it is frozen on the main screen, or it opens and shows an error "Ezcad-lite work only with USBLMC-Lite, Use Ezcad" or "Can not find a valid device".

    Thanks

  3. #23
    Registered
    Join Date
    Aug 2005
    Posts
    108

    Re: Morn Fiber laser/ezcad2 stuck in demo mode

    Hi, LITE card only run with EzCad 2.14.16 ,

  4. #24

    Re: Morn Fiber laser/ezcad2 stuck in demo mode

    Quote Originally Posted by oneeye View Post
    Hi, LITE card only run with EzCad 2.14.16 ,
    Hi
    Even using version 2.14.16 on desktop, I can't use the program.
    see in the video

    https://www.youtube.com/watch?v=IYgHaccMe_I

  5. #25
    Registered
    Join Date
    Aug 2005
    Posts
    108

    Re: Morn Fiber laser/ezcad2 stuck in demo mode

    Yes , it happens with suck lite card, and ezcad 14.16 is also not practical to use.
    I sold a machine with lite cart to a customer and the same thing happened, it only ran on the notebook. I had to go back there and replace the card with an LMCV4-Fiber-M.

    try find a working lite at Laser Everything discord, you will find link in youtube.

Page 2 of 2 12

Similar Threads

  1. Has anyone here imported a MORN fiber laser cutter from China?
    By Josie_Zhu in forum General Laser Engraving / Cutting Machine Discussion
    Replies: 2
    Last Post: 08-07-2018, 12:28 PM
  2. Metal marking with morn fiber laser machine
    By RoseChina in forum General Fiber Laser Cutting
    Replies: 0
    Last Post: 08-31-2017, 09:10 AM
  3. UCCNC Software Stuck in Demo Mode
    By Andrew22 in forum UCCNC Control Software
    Replies: 3
    Last Post: 12-23-2016, 06:38 PM
  4. Fiber metal laser cutting machine - MORN new product
    By Shirley in forum News Announcements
    Replies: 1
    Last Post: 11-20-2014, 07:01 AM
  5. Demo Mode
    By Square Tech in forum BobCad-Cam
    Replies: 3
    Last Post: 10-08-2013, 11:24 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •