Quote Originally Posted by moldcore View Post
Got one of those USB floppy emulators and still get the same error when loading into the machine or run one after loading. I can run programs directly from the thumb drive however. My guess is that it may be a memory issue in the SBC control. I'll check on that when this project is done with. I've lost a month chasing this thing down and I'm no closer now than when I started. So frustrating. PC based controls suck.
I had a similar issue, and turned out to be the percent symbol at the beginning of the code used in networking messed up the file when using the emulator or disk drive. Erasing this fixed it. Also with the emulator you have to use a stick 1gb or less. Format to FAT as well