585,737 active members*
4,433 visitors online*
Register for free
Login

Thread: M24 and M64

Results 1 to 3 of 3
  1. 08-16-2018, 05:45 PM #1
    kreativjustin
    kreativjustin is offline Junior Member
    Join Date
    Dec 2012
    Posts
    43

    M24 and M64

    Hello, we got our hands on a hand-me-down Hardinge Elite 8/51. It's in extremely good shape, so this is a good thing.

    However, I was looking through the programs that were on there, and they consistently use a M24 and M64 after every tool change, no matter what type of tool it is.

    I've always programmed Haas lathes, and I've never had to use these before.

    Does anyone know why they would have these in there after every tool change?

    All help is appreciated.
    Reply With Quote Reply With Quote
  2. 04-01-2024, 09:52 PM #2
    Crane2486
    Crane2486 is offline
    Join Date
    Feb 2024
    Posts
    2

    Re: M24 and M64

    M24, Main spindle contouring mode off
    M64, Spindle feedback from main spindle
    Reply With Quote Reply With Quote
  3. 04-01-2024, 09:54 PM #3
    Crane2486
    Crane2486 is offline
    Join Date
    Feb 2024
    Posts
    2

    Re: M24 and M64

    M24, Main spindle contouring mode off
    M64, Spindle feedback from main spindle
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules