584,837 active members*
4,895 visitors online*
Register for free
Login
Results 1 to 4 of 4

Hybrid View

  1. #1
    Join Date
    Oct 2009
    Posts
    22

    PP for Dolphin Mill

    Has anyone written a PP for the Dolphin Mill Pro and a Centroid Acron that they would like to Share? Thanks


    John

  2. #2
    Join Date
    Feb 2007
    Posts
    412

    Re: PP for Dolphin Mill

    Hello,

    I have attached a post that we did for a Centroid control, should be OK for your machine.

    IMPORTING POSTS

    Having received a new or modified post processor, you will need to import it.

    To do this double click the PartMaster Post Processor icon from your desktop, from the top toolbar choose Import
    and browse to the folder where the modified post processor was saved.

    When the file has been imported you will see the contents in the display area, next choose Compile from the top toolbar to create the .ppx file.

    The new post-processor is now ready for use. Close the post-processor by using File > Exit.

    When you next run DCAM or DWES the post processor will appear in the drop down list along with all original posts.


    Regards
    Andre

  3. #3
    Join Date
    Oct 2009
    Posts
    22

    Re: PP for Dolphin Mill

    Thank you Andre. Could you please send me the .PP file for some reason the zip file will not unzip for me. Thanks.

    Jogn

  4. #4
    Join Date
    Oct 2009
    Posts
    22

    Re: PP for Dolphin Mill

    Never mind Andre. Operator error on this end. Thanks again.


    John

Similar Threads

  1. Dolphin Demo / Dolphin Sales / Dolphin Support
    By Dolphin USA in forum Dolphin CAD/CAM
    Replies: 2
    Last Post: 10-28-2012, 05:28 PM
  2. Anyone using Dyna Myte 2400 with Dolphin Mill ?
    By shindog in forum Dolphin CAD/CAM
    Replies: 9
    Last Post: 11-17-2011, 03:08 AM
  3. Dolphin Part Master Mill Software
    By TacPyro in forum Dolphin CAD/CAM
    Replies: 3
    Last Post: 01-19-2010, 07:39 AM
  4. Thank you Dolphin
    By ImanCarrot in forum Dolphin CAD/CAM
    Replies: 1
    Last Post: 03-17-2008, 10:35 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •