[DieLichtwerbung]

Hello,

we have an old Multicam Router of the M Series with the old Grey Keypads. In this Keypad a Transformer with T1023 10K printed on it became loose. I might be able to get a used keypad for 2000, upgrade for 12.000 or just buy a small part an try to fix it myself for 10 bucks. But I can't determine what kind of Transformer it is. Does anybody know what it might be, or have a schematic of the Keypad?
I only found this picture of the board: https://www.controlrepair.com/produc...ol-board/72112 And I contacted System 3R, but they don't know anything about ever building any kind of board.

Any help would be appreciated. Before i buy some audio/signal transformer with 10K ohm. (My best guess as of now)

Thank you
Steffen

[MCPservice]

Post a pic of the keypad please

Hello,

we have an old Multicam Router of the M Series with the old Grey Keypads. In this Keypad a Transformer with T1023 10K printed on it became loose. I might be able to get a used keypad for 2000, upgrade for 12.000 or just buy a small part an try to fix it myself for 10 bucks. But I can't determine what kind of Transformer it is. Does anybody know what it might be, or have a schematic of the Keypad?
I only found this picture of the board: https://www.controlrepair.com/produc...ol-board/72112 And I contacted System 3R, but they don't know anything about ever building any kind of board.

Any help would be appreciated. Before i buy some audio/signal transformer with 10K ohm. (My best guess as of now)

Thank you
Steffen

[DieLichtwerbung]

Ok, here you go.

[MCPservice]

Give this company a call this is the ones who built this keypad.
Hand Held Computers | Your Way | Since 1987 | Two Tech

They can probably help you out...