584,830 active members*
5,379 visitors online*
Register for free
Login
IndustryArena Forum > Community Club House > Education - Teachers and Students Hangout > DYNA MYTE 4800 / MITSUBISHI MELDAS_500 ATC & SPINDLE problems
Results 1 to 1 of 1
  1. #1
    Join Date
    Aug 2018
    Posts
    3

    Exclamation DYNA MYTE 4800 / MITSUBISHI MELDAS_500 ATC & SPINDLE problems

    Hello,

    I have a DYNA MYTE 4800 with MITSUBISHI MELDAS 500 control. I'm not sure, but I think that the model is old and discontinued. Well, I've two problems with this CNC:

    1./ SPINDLE

    In MDI mode I turn on the spindle and works ok, but when a change to HANDLE mode the spindle turns off right away. I not sure if that is a coding problem or wire connecting PCB problem (electronic issue).

    2./ ATC-MAGAZINE

    In MDI mode I enter the tool code for automatic change, for example, T10 M6, but the panel shows me this failure code:
    'P290 IF SNT. ERROR'
    MDI EDIT
    Attached Thumbnails Attached Thumbnails ATC_Magazine.jpg   Mitsubishi_control.jpg   Meldas500_screenpanel.jpg  

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •