584,862 active members*
5,152 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > CNC Swiss Screw Machines > CITIZEN Machines > need help citizen M-32 LATHE ´´ OVER VOLTAGE´´ ERROR
Results 1 to 3 of 3
  1. #1
    Join Date
    Nov 2014
    Posts
    1

    need help citizen M-32 LATHE ´´ OVER VOLTAGE´´ ERROR

    hi everyone

    im victor,i new here


    i have a citizen m-32 lathe and it has an ERROR
    OVER VOLTAGE ERROR. the lathe sometimes work fine, but after 10 minutes the alarm appearrs again


    help me please
    Attached Thumbnails Attached Thumbnails 20180903_133237 (1).jpg  

  2. #2
    Join Date
    Nov 2014
    Posts
    26

    Re: need help citizen M-32 LATHE ´´ OVER VOLTAGE´´ ERROR

    You have a short on the 24v dc this is normally the wire to the X2 brake clear any swarf from this area long term the cable will need attention

  3. #3
    Join Date
    Jul 2019
    Posts
    53
    Hello yes the power supply alarm is a problem on the drive you can send me a photo

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •