Hi fellow zones, I have a 1990 fadal 6030 it's always been a great machine. A while ago I noticed a surface finish issue started, it was fine the day before. Anyhow it has not been an issue because parts get painted etc. Now it's a issue. Information I have collected. I put a holder in the spindle and mounted a wrap indicator to the holder and moved it to indicate against the frame of the spindle.
If I put a screwdriver at the Gage line gap between the spindle and the holder I can move it. 002. If I use a pribar against a block on the table and the spindle I can move that .002 as well. So I'm thinking either the resolver or maybe the draw bar bellview washers. Any help would be appreciated, thank you.