[i2RCNC]

Hello All,

I would like to introduce our new product line of i2R CNC Machines. These are small format CNC with industrial strengths. i2R stands for Imagination to Reality. That is what we hope to help the community achieve with our CNC machines. By providing that high power and performance that you can afford. Our flag ship i2R 4 will start at $2999! Please look at our specs and some teaser photos. We will start to add alot more content in the next few months. We were also at the Atlanta IWF in august with Axiom Precision and we had great turn out. Check out our video on youtube!


We offer very rigid body with steel construction, ball screws and linear guide rails on all 3 axis.
With high powered .8kw air cooled spindle this machine is very quiet

We operate with UCCNC software and recommend Vectric Vcarve for design software.

Life time support will be provided with i2R USA team.

Will come in 3 size configurations.
i2R4 2x2
i2R6 2x3
i2R8 2x4

Delivery date is Mid-Dec to Jan.

We are taking pre orders soon. If you are interested you can PM me or email us

[email protected]

Our website will officially launch in Mid October.

Will be high quality built with the following specs for reference in attachment.

Will will have a showroom store that offers training course for CNC and Vectric in Brooklyn NY in Jan 2019 . Stay Tuned!

i2R - Imagination to Reality
Instagram https://www.instagram.com/i2rcnc/
Facebook https://www.facebook.com/I2RCNC/?ref=bookmarks
Youtube https://www.youtube.com/channel/UCiv...QAfTESUkeVPxwA

[elieheloua]

Hello All,
..........A[/url]

So, What Hardware Are You Using With UCCNC (Controller, Drivers, Motor)

Thank

[OlfCNC]

When will these be available for purchase in Western Europe?

[i2RCNC]

Sorry for the delay. To answer your question:

The i2R CNC controller is a specifically designed with a ethernet controller to run the UCCNC software. All I/O is optocoupled from the main controller.

Unlike most other low cost players we
We do not use belts
We do not use any rollers

The i2r CNC runs on
- 15mm profiled linear rails
- 16mm ballscrews with fully recirculating ball nuts
- full aluminium Tslot table and aluminium subframe as standard

The drive train has
- NEMA 23 stepper motors
- 3 axis combination drive card
- 3 jaw 3 part couplers between motor and ballscrew end condition
- each axis has a proper thrust bearing encapsulating the ballscrew location

Let me know if you have further questions. We can send you more information via email if you'd like.

- - - Updated - - -

The i2R CNC's will be available in the EU before the end of Q1 - please let us know if you are interested. We will add you to our email database to let you know when the machines are available. We already have a number of key companies who will manage the supply and support of our machines.

Equally - please let us know if you are interested as a distributor/reseller as we are looking for partners.

Cheers!

[ger21]

So, What Hardware Are You Using With UCCNC (Controller, Drivers, Motor)

Thank

It's using a new controller (AXBB) that hasn't been released yet.
Attached is a preliminary manual.

[OlfCNC]

Thank you for your reply.
I'll keep an eye on the machine release date and will likely to get one of them, they look delicious and the price seems right.
I'm just a CNC user, not a seller/distributor. LOL

[asuratman]

The AXBB will be more efficient for wiring. So we need only drivers, AXBB and PSU's, maybe some more relays. We can have 6 axis cnc, easier to have 4 axis/5 axis (inc. slaved axis).

[ericks]

Looks like a nice unit for the price

[i2RCNC]

Thank you so much!

We've worked very hard to meet specific standards and price it so that more people can have access to an affordable machine that is well engineered. Please keep an eye open for us. We also have locations launching in the next couple months in NYC, Dublin, London, Taiwan and AUS. Any feed back is greatly appreciated.

[i2RCNC]

Thank you sir, feel free to contact us via [email protected] if you have any other questions or are interested in being an i2R user

[he1957]

Hi,

Yes please add me to your list of interested parties. Possibly interested in being a reseller in Australia/Tasmania.


Thanks,

HarryE.
===

[bfilion05]

Curious on the status of the new i2r's? Looking at Axiom's website the ship dates have continually moved but I haven't seen any reviews or feedback on the new units. Have they been shipping out or have they been delayed? Also curious as to the difference between the Axiom series and i2rcnc series. Looking to take the plunge into the CNC world and am awaiting the initial feedback and reviews on the i2r before pulling the trigger on a machine.

[mithiral67]

Sub

[OlfCNC]

Any news on these machines availability in the EU?

[i2RCNC]

Just to update the machine have begun shipping last month! We got a few in our inventory now.

The EU release should be coming soon will keep you guys posted !

[i2RCNC]

Hello,

We are currently shipping machines and you should start to see reviews on the web pop up shortly from our users. Please feel free to email [email protected] if you have any questions and haven't placed an order yet. i2R CNC is based in Brooklyn, NYC and we offer two control options for our i2R CNC models which are the UCCNC (PC controlled) and the DSP (hand held pendant). Axiom precision is a dealer of our i2R CNC line and only carries the DSP controller as an option. We are also a dealer of Axiom Precision machines. You can have a look at our website on i2rcnc.com


Please let me know if you have any other questions and I'll gladly answer them. Thanks!

[SwethaJ]

Thanks mate!