584,826 active members*
5,091 visitors online*
Register for free
Login

Thread: step file

Results 1 to 5 of 5
  1. #1
    Join Date
    Sep 2011
    Posts
    21

    step file

    Hello,

    After loaded step or igs file into CAM module, I can't do anything with model.
    Why can't I work with step or igs files in CAM module?

    Best Regards
    Amnon

  2. #2
    Join Date
    Sep 2009
    Posts
    78

    Re: step file

    We need more information about what is happening. When you say you can't work with the model, what is the problem?
    NX 10.0.3

  3. #3
    Join Date
    May 2014
    Posts
    11

    Re: step file

    Try doing a Wave link from the model and hide the original, this will allow you to select keypoints and apply Synchronous operations. Or, it could be the geometry came in as non-solid. See link for a discussion on the forum.

  4. #4
    Join Date
    Sep 2009
    Posts
    78

    Re: step file

    bnagel made a good point. Make sure sure your selection filter is set properly.
    NX 10.0.3

  5. #5
    Join Date
    Sep 2011
    Posts
    21

    Re: step file

    Thank's a lot ...... filter......mmmm what a stupid mistake.

    Respect
    Amnon

Similar Threads

  1. Step file issues
    By brianpfeifer1 in forum Tutorials
    Replies: 7
    Last Post: 03-15-2016, 04:39 AM
  2. Step file 3D Milling
    By Koblenzer in forum BobCad-Cam
    Replies: 5
    Last Post: 08-24-2011, 06:36 PM
  3. Replies: 1
    Last Post: 07-04-2011, 03:08 PM
  4. step file
    By ataxy in forum Mastercam
    Replies: 5
    Last Post: 10-14-2008, 03:31 PM
  5. How to edit MPFAN post file step by step
    By m_bhui in forum Post Processors for MC
    Replies: 2
    Last Post: 10-04-2008, 11:42 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •