[Sythe179]

Doosan lynx 300M
Fanuc i series

Every time I try and index counter clockwise, it goes 2 tool locations instead of 1, then errors with a 2119 tool change timeout.
Proximity sensor seems to be working.
Tools are fairly balanced, run for 2 weeks before this issue turned up.
If I go clockwise, it works normally.

Running machine with M180's Infront of tool changes to keep it running but...
Any ideas why counter clockwise is being weird?

[DANIEL HALL]

i have a similar problem on my puma 200 and was a small relay , i switched for the one that control the light and solve the problem but not light , i replace all of them, no more problems, was not to expensive