2.5" OAL CR 1018 steel round, .350" of 1/2-20 threads on one end. I will be screwing a nut onto the threads and welding on to them. Qty 100 per order to start, this will be a regular order. Off the shelf cold rolled round bar is fine. +- .020" on length.
Respond to [email protected] with a quote and TRUE time line. Late shipping is not acceptable.
Thank you.
JIM
Results 1 to 4 of 4
-
09-22-2018, 05:00 PM #1
Registered
- Join Date
- May 2007
- Posts
- 122
Need 1/2" bar threaded on end x 100
-
09-22-2018, 06:00 PM #2
Registered
- Join Date
- Sep 2009
- Posts
- 135
Re: Need 1/2" bar threaded on end x 100
Jim
I sent you a message but it was rejected.
Sent from my SM-G955U using Tapatalk
-
09-22-2018, 06:27 PM #3
Registered
- Join Date
- May 2007
- Posts
- 122
Re: Need 1/2" bar threaded on end x 100
E mail addy fixed. The "U" on my computer wont work 1/2 of the time.
-
09-25-2018, 10:27 PM #4
Registered
- Join Date
- May 2007
- Posts
- 122
Re: Need 1/2" bar threaded on end x 100
The job has been awarded, thanks all who replied.
Reply With QuoteSimilar Threads
-
RFQ - Threaded adapter from 1.125" SS rod
By CutOnce in forum North America RFQ'sReplies: 2Last Post: 07-07-2017, 08:22 PM -
RFQ: Lathe Turned parts ~1/2"x5" partially threaded and cross drilled
By makethis in forum North America RFQ'sReplies: 2Last Post: 07-10-2015, 02:18 PM -
Applying a "threaded" traction surface ?
By tubeguy in forum BobCad-CamReplies: 5Last Post: 11-21-2012, 05:47 PM -
5mm coupler and 3/16" threaded rod
By bianchi in forum DIY CNC Router Table MachinesReplies: 5Last Post: 04-28-2012, 05:33 PM
Tags for this Thread
Posting Permissions
