584,861 active members*
4,671 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Servo Motors / Drives > Yaskawa Varispeed 626VM3 Fault A00
Results 1 to 6 of 6
  1. #1
    Join Date
    Jul 2007
    Posts
    5

    Yaskawa Varispeed 626VM3 Fault A00

    I'm receiving a spindle alarm on my Hurco Mill that has a Yaskawa 626VM3 servo drive.
    The machine was turned off over the weekend. When I boot up the control The display on the drive has F-A00.
    Please let me know what this alarm is and what can be done to correct it.

  2. #2
    Join Date
    Jan 2005
    Posts
    15362

    Re: Yaskawa Varispeed 626VM3 Fault A00

    Quote Originally Posted by darrelt View Post
    I'm receiving a spindle alarm on my Hurco Mill that has a Yaskawa 626VM3 servo drive.
    The machine was turned off over the weekend. When I boot up the control The display on the drive has F-A00.
    Please let me know what this alarm is and what can be done to correct it.
    How are you powering your machine this is what a F-A00 fault is
    Attached Thumbnails Attached Thumbnails 626 VFD Fault F A00.PNG  
    Mactec54

  3. #3
    Join Date
    Jul 2007
    Posts
    5

    Re: Yaskawa Varispeed 626VM3 Fault A00

    When the main power switch on the electrical panel is turned on the control boots up.
    Then there's a green power on PB in the center of the pendant I push then the cycle start PB.
    Then the machine would be fully powered up and ready to reference.
    5 seconds after the power on and cycle start PBs are push is when the spindle alarm occurs.

  4. #4
    Join Date
    Jan 2005
    Posts
    15362

    Re: Yaskawa Varispeed 626VM3 Fault A00

    Quote Originally Posted by darrelt View Post
    When the main power switch on the electrical panel is turned on the control boots up.
    Then there's a green power on PB in the center of the pendant I push then the cycle start PB.
    Then the machine would be fully powered up and ready to reference.
    5 seconds after the power on and cycle start PBs are push is when the spindle alarm occurs.
    What are you using to power your machine Electrical Power supply
    Mactec54

  5. #5
    Join Date
    Sep 2015
    Posts
    25

    Re: Yaskawa Varispeed 626VM3 Fault A00

    Did you resolve this issue

    Sent from my Moto G (5) Plus using Tapatalk

  6. #6
    Join Date
    Dec 2020
    Posts
    1

    Re: Yaskawa Varispeed 626VM3 Fault A00

    I have the same issue, so how did you fix the problem

Similar Threads

  1. Yaskawa Varispeed 626VM3 Help
    By Derwood1723 in forum Servo Motors / Drives
    Replies: 44
    Last Post: 05-13-2023, 08:35 PM
  2. Yaskawa 626VM3 Repair?
    By giz in forum Spindles / VFD
    Replies: 38
    Last Post: 04-08-2020, 10:28 AM
  3. yaskawa varispeed 626vm3.
    By wilko1 in forum Servo Motors / Drives
    Replies: 4
    Last Post: 10-23-2019, 01:42 AM
  4. matsuura cnc with Yansac varispeed 626vm3 strange problem
    By ivision in forum Servo Motors / Drives
    Replies: 0
    Last Post: 03-30-2014, 07:56 PM
  5. Trouble Varispeed 626vm3
    By Fyp Engineering in forum Servo Motors / Drives
    Replies: 1
    Last Post: 06-17-2013, 11:49 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •